Agilent Technologies InfiniiVision DSO6014L, User Manual

Page: 190 / 371

Triggering the Oscilloscope 4
6000 Series Oscilloscope User’s Guide 189
One example of triggering on a specific line of video is looking at
the vertical interval test signals (VITS), which are typically in
line 18. Another example is closed captioning, which is typically
in line 21.
1
Press the Trigger
More
key, then press the
TV
softkey.
2 Press the Settings softkey, then press the Standard softkey to
select the appropriate TV standard (NTSC).
3
Press the
Mode
softkey and select the TV field of the line you
want to trigger on. You can choose
Line:Field1
,
Line:Field2
, or
Line:Alternate
.
4
Press the
Line #
softkey and select the number of the line you
want to examine.
Figure 15 Example: Triggering on Line 136
Alternate Triggering
If Line:Alternate is selected, the oscilloscope will alternately trigger on the
selected line number in Field 1 and Field 2. This is a quick way to compare the
Field 1 VITS and Field 2 VITS or to check for the correct insertion of the half line at
the end of Field 1.