Agilent Technologies 83236B, Operating Manual, Page: 60 / 164

60
Chapter 2, Installation
Load and Run the Connectivity Test Software (Option 001 or 002)
Figure 20 Connectivity Test Connection diagrams for the Base Station Test Configuration
POWER
FROM DUPLEX OUT TO ANT IN
8 323 6B
P C S I N T E R F A C E
RF IN/OUT RF OUT only
TEST SET
1.8-2.0 GHz UUT
ON OFF
PWR REF
UNLOCK
ANALYZER ANALYZER ANALYZER GENERATOR
DATA
CLOCK IN
BASEBAND
DATA IN
TRIGGER
IN
BASEBAND
DATA IN
114.3 MHz IF IN REF IN 10 MHz REF OUT
CW
RF IN
IQ
RF OUT
FRAME
EXT
IF IN
CONTROL I/O
DIAG
OUT
GEN BB
DATA OUT
ANL
TRIG OUT
BIT CLK
OUT
SYMBOL
CLK OUT
OFF-CHANNEL
PULSE MOD
OUT
CLK OUT
From Agilent 83236 TO ANT IN
To Agilent 8920,21 ANT IN
(Cable P/N 83236-61603)
From Agilent 8920,21 10 MHz
REF OUTPUT
To Agilent 8320NX REF IN
(Supplied with cellular adapter)
To Agilent 8920,21 10 MHz REF
OUTPUT
(BNC “T” adapter P/N 1250-0781)
From Agilent 8920,21 10 MHz
REF OUTPUT
To Agilent 83236 REF IN
(Cable P/N 8120-1839)
From Agilent 8920,21 GPIB
To Agilent 83236 GPIB
(Mod. No. Agilent 10833D)
From Agilent 83236 FROM
DUPLEX OUT
To Agilent 8920,21 DUPLEX OUT
(Cable P/N 83236-61603)
Connections between
the Test Set and Cellular
Adapter are not shown
in this figure.
Note: