Agilent Technologies 83236B, Operating Manual, Page: 157 / 164

157
Appendix C, Error Messages
Error Message
− 138 Suffix not allowed
The unit suffix could not be used.
−
140 Character data error
A character data error.
This message is displayed if an error other than those corresponding to error code
−
144 or
−
148 is generated.
− 141 Invalid character data
Character data that was invalid or could not be recognized was sent.
−
144 Character data too long
Character data was too long. (The maximum allowable length is 12 characters.)
− 148 Character data not allowed
Character data may not be used.
−
150 String data error
Character data is not correct.
− 151 Invalid string data
Invalid character string data was sent.
This message is displayed if, for example, the end code (END) is sent within string data
delimited by quotation marks (
” “
).
−
158 String data not allowed
Character data may not be used.
− 200 Execution error
An execution error.