Agilent Technologies 83236B, Operating Manual, Page: 155 / 164

155
Appendix C, Error Messages
Error Message
− 104 Data type error
The data type is invalid. This message would be displayed, for example, if an attempt was
made to input numeric data where only character data should be input.
−
108 Parameter not allowed
Too many parameters were contained in the command that was received.
− 109 Missing parameter
The number of parameters in the command was not correct.
−
110 Command header error
A header error was generated. This message is displayed if an error other than those
corresponding to error codes
−
111 to
−
119 is generated.
− 111 Header separator error
The header separator was incorrect. This message is displayed if a character other than
those allowed in headers immediately follows a header. This message would be displayed
if, for example, a character immediately followed a heading without a space between the
heading and the character.
−
112 Program mnemonic too long
There were too many characters in the command. (The maximum allowable number of
characters in a command is 12.)
− 113 Undefined header
Either an undefined header or an undefined command was sent.
−
114 Header Suffix out of range
The unit of the header was out of the range. The header was made invalid due to the unit
of the numeric parameter that immediately followed the command.