Agilent Technologies 83236B, Operating Manual, Page: 29 / 164

29
Chapter 1, General Information
Other Information
Other Information
Power
Requirements
The PCS Interface requires the following power source:
Voltage: 90 to 132 Vac, 198 to 264 Vac
Frequency: 47 to 63 Hz
Power: 100 VA maximum
Fuse
The main fuse is located inside of the PCS Interface. The type and rating of this
fuse are as follows.
UL/CSA type, time delay, 3 A, 250 Vac
WARNING: The main fuse is not replaceable by the operator. Refer servicing to qualified
personnel.
Ventilation
Requirements
To ensure adequate ventilation, make sure that there is adequate clearance around
the PCS Interface.
Instructions for
Cleaning
For cleaning, wipe lightly with a soft damp cloth.
Calibration Cycle
Contact your nearest Agilent Technologies service office.