Agilent Technologies 83236B, Operating Manual, Page: 51 / 164

51
Chapter 2, Installation
When Used with Agilent 8921A for CDMA Base Stations Tests
b If you are placing the Test System vertically (as is often done when putting the
equipment on the floor), the PCS Interface’s rear feet must be placed on the same
surface as those of the Test Set. After placement, rotate the handle of the Test Set
downwards to provide support for the PCS Interface. Refer to figure 11.
Figure 14 Vertical configuration (side view) for the Agilent 8921 Test Configuration
Test Set Cellular Adapter
PCS Interface