AGCO LELY ATTIS PT 130, Operator'S Manual

Page: 31 / 98

2.3.9 Extension kit for 500mm film
This extension kit changes the turn speed of the
wrapping table rollers to accept film rolls with a
width of 500 mm. The extension equipment is a
gear wheel and a drive chain extension.
An alternative gear wheel replaces the standard
gear wheel to change the turn speed of the
wrapping table rollers for correct overlap of the
film layers. The chain extends to accept the new
gear wheel ratio.
GUID-CB187BB6-D8BB-4FCE-BD52-93101AF071E6-high.jpg [High]
Fig. 12
2.3.10 Suction cup
The suction-cup assembly (1) holds the E-link
control (2) with a bracket. You can attach the
mount to all flat and hard surfaces that air does not
go through.
The suction-cup uses vacuum to hold the
assembly against the surface. The crank lever
moves the mount to make or release the vacuum,
to hold or to loosen the assembly's position.
GUID-D96B6837-8D7F-4326-B5C0-1FE940A48EBB-high.jpg [High]
Fig. 13
2.3.11 Flow control valve
The flow control unit adjusts the hydraulic oil flow
into the hydraulic system. The adjustment screw
on the unit is a throttle valve that controls the oil
flow.
GUID-B47A9661-8F01-48EB-9C0C-E38F1E66AE64-high.jpg [High]
Fig. 14
GUID-3501E78F-2B16-45E9-9BD4-CD2F0789DAD6 [V1]
GUID-BBBC9950-118A-4DC6-B054-7D6609DB48F0 [V1]
GUID-AAFFFA6B-DB68-4C6F-92BA-4199AC0C4A48 [V1]
2. Introduction
Bale Wrapper 31
4820.LE.EN01