manualshive.com logo in svg

AGCO LELY ATTIS PT 130, Operator'S Manual

Share
Download
AGCO LELY ATTIS PT 130 Operator'S Manual Download Page 19

1.4.4  Film knife cover

A cover is on the machine to hold the knife in

position.

GUID-2C0D41EC-460E-40EF-AECC-529946431AE9-high.jpg [High]

Fig. 5  

1.4.5  Cover for the chain drive

There is a cover installed on the chain drive that

stops access of personnel and objects to the

components when in operation.

GUID-F0791CD5-855D-46A3-9FAE-B28635F0C2CC-high.jpg [High]

Fig. 6  

1.4.6  Lock the loader arm in position

WARNING: Risk of death or injury.

For road transport you must lock the loader arm.

Make sure that the clip (1) is in the pin (2) to lock

the pin and the arm in position.

GUID-D9811DDF-316A-4000-B7D3-01D56156DF48-high.jpg [High]

Fig. 7  

GUID-9C515FF0-6B46-41F6-8604-449DEBDDFC86 [V1]

GUID-1AAB9616-AC25-4951-87AE-BE1E06D4A48A [V1]

GUID-1667AF99-6831-4D22-94DA-012918A8F70D [V1]

1. Safety

Bale Wrapper 

19

4820.LE.EN01

Summary of Contents for LELY ATTIS PT 130



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands