AGCO LELY ATTIS PT 130, Operator'S Manual

Page: 28 / 98

2.3 Descriptions
2.3.1 General operation
The machine moves when attached to the tractor
and hydraulically operated by an E-Link module (6)
attached to the tractor cab.
The machine moves when:
• The loading arm (1) lifts the bale up on to the
wrapping table (2).
• The table turns to add layers of plastic from the
stretcher unit (5) to the bale.
• After the necessary number of turns the table
tilts and the cutter assembly (4) cuts the plastic
and holds it prepared for subsequent bales.
• If necessary the bale end-tipper (3) will set the
bale on its end to make sure that the bale
cannot move on angular ground.
GUID-6FFF4A9C-5A35-449D-BB7A-1E16D35B67C3-high.jpg [High]
Fig. 3
2.3.2 Drawbar
The draw bar connects the machine to the tractor
and the draw bar coupler eye is height adjustable
to adjust the connection to the height of the
tractor.
The wrapper has a 40 mm diameter coupler
installed. Examine the tractor to make sure that it
will install on the tractor.
GUID-A40E648C-FAA1-4EDF-A7A1-DCA36CEBB0FC-high.jpg [High]
Fig. 4
2.3.3 Device to stop use without approval
To make sure that the machine is operated only by
approved persons, a lock can be installed on the
drawbar head.
Refer to your local laws to find if this device is
mandatory.
GUID-99CCDC78-0793-42AC-82C9-48F487A70C43-high.jpg [High]
Fig. 5 Device to stop use without approval for the Ball Head
[V]
GUID-429AC0E0-1F0A-4FEF-AAA8-54A5E6FD26A1 [V1]
GUID-EEF53770-B11B-426F-BF6D-3017F2D581EC [V1]
GUID-6A8AEA66-B356-4B8C-B15A-DF991C9C671B [V2]
2. Introduction
28 Bale Wrapper
4820.LE.EN01