Page 26
2017-01-13
Release: 02.0
Search Devices (3)
The aflexConfigurator searches for existing control units using the "Search Devices"
button in the network
Display the control units (4)
This field lists the control units found on the network. Also stored control units are
displayed from previous program starts.
5.3.1 Control unit States
The control units found or stored in the network have different device status properties.
These are described below.
Figure 14: Display control unit
(1) Control Unit Name
(2) Remove Control Unit from lists
(3) IP Address
(4) Series number
(5) Network status, Subnet
(6) Ping Status
(7) Ping reply
(8) Save Control Unit
(9) Establish connection
Control Unit Name (1)
The name of the Control Unit can be changed in the aflexConfigurator and the appli-
cation can be adjusted. This facilitates the identification while using more aflex devices.
Remove Control Unit (2)
Remove the Control Unit from the display. If the control unit is located in the same
network, it can be found again via "Search Devices".
IP Address (3)
The IP address of the Control Unit
2
1
3
4
5
3
6
8
7
9
