Release: 02.0
2017-01-13
Page 47
Figure 39: Save / Restore Controller Configuration
(1) Create a backup file from all the control data
(2) Overwrite all control settings from a backup file.
Backup of the control data
All settings are stored on the control unit. To back up these settings you can create a
complete backup of the EEPROM. The "Load Configuration to File" area (1) is used to
create this backup. After the EEPROM has been read, the backup file will be created
using the "Save to File" button. The backup file can be loaded in the "Restore Config-
uration From File" area (2) and transferred to the EEPROM. To enable this data, the
control unit must be restarted.
1
2
