Page 52
2017-01-13
Release: 02.0
Figure 47: Client Node Functions "Admin" View
(1) Reboot
(2) Activate Bootloader
(3) Save to EEPROM
(4) Add Client Node
(5) Change Client Node
(6) Delete Client Node
Reboot (1)
Restart the client node
Activate Bootloader(2)
This function is available from the user level "advanced". Enables bootloader mode
and restarts the client node. When the bootloader is activated, the client node changes
to bootloader mode when restarted. In this firmware updates are carried out. More
information can be found in the section 5.10.3.
Save to EEPROM(3)
This function is available from the user level "advanced". Saves the settings of the
selected client node in the remanent memory.
Add Client Node (3)
This function is available from user level "admin". Adds a new client node. The client
node type and the serial number must be entered.
Figure 48: Add Client Node
6
5
4
