Release: 02.0
2017-01-13
Page 31
Figure 22: Main menu
Figure23: Main menu extended view
(1) Operating mode
(2) Release
(3) control interface
(4) controller menu
(5) client nodes
(6) aflex modules
(7) fieldbus config
Operating mode (1)
The current operating status is given back on the display status. The sliding button can
be used to toggle between automatic/manual modes.
Automatic operation:
In automatic mode, the aflex control responds to commands from the higher-level con-
troller. These are transmitted via the fieldbus interface. As long as the automatic mode
is active, no commands can be executed from the "aflexConfigurator". The "aflexCon-
figurator" generates an error message in this case.
After a restart, the aflex control is found in the automatic mode.
1
2
3
4
5
6
7
