Page 50
2017-01-13
Release: 02.0
Operating modes of the client nodes (1-4)
The different operating modes are shown in colour. Depending on the operating mode,
various functions are activated or deactivated.
Offline (1)
If the client's power supply is interrupted or the client is not connected to the control
unit via the BackSideBus, this is displayed as "offline".
Connected (2)
The control unit has an existing connection to the client and this can be used with all
functions.
Bootloader (3)
The bootloader is used to transfer firmware upgrades to the clients. If the client is in
the boot loader, no firmware is active and all client functions are disabled. This notifi-
cation is also displayed when you click on this client. It is also possible to leave the
boot loader directly via the "go back to firmware" button.
Figure 42: Bootloader Mode "Standard
“View
Figure 43: Bootloader Mode "Advanced
“View
From the user level "advanced" the firmware update functions are visible. A detailed
description of this process can be found in the section 5.10.3.
