Release: 02.0
2017-01-13
Page 57
5.7.3 Profibus Module
The control module "Profibus module" is used to integrate the aflex control into a Pro-
fibus system. This module is optional and is only required in connection with the Profi-
bus.
Figure 54: Profibusmodul "standard" view
Figure 55: Profibusmodul "advanced" view
(1)
Client Node Information Line
(2)
Profibus Address
(3)
Data width of the fieldbus inputs
(4)
Data width of the fieldbus outputs
(5)
Transfer new settings
(6)
Re-initialize Profibus Node
The Profibus address (2) and the data width of the fieldbus node are defined in the
client configuration (3) (4). The settings can be adjusted from the user level "ad-
vanced". The settings are transmitted by means of the "send settings" (5) button. The
"reinitialize" button (6) initializes the Profibus module. The data that is to be exchanged
via the fieldbus must be configured in the "fieldbus menu". You can find information on
this in the section 5.8.
2
3
4
5
6
1
