Page 40
2017-01-13
Release: 02.0
5.5.4 Simulation of the external control
In automatic mode, the aflex should only be operated in
short pulses between 100 and 500 ms in order to keep
the cycle times as low as possible. This function is pro-
vided to take account of this pulsed control already dur-
ing the creation of the aflex configurations. The simula-
tion consists of several control sequences and a pause
sequence. Each sequence can be freely parametrized. The simulations, also known
as demos, can be edited, exported and imported.
Figure 31: simulate external machine standard view
Figure 32: simulate external machine advanced view
Figure 33: simulate external machine advanced view
(1) Select a simulation
(2) Help page
(3) Start/Stop of the selected demo
(4) Create a new simulation
(5) Editing the selected simulation
(6) Delete the selected demo
Selection of a simulation (1)
Display of saved, available simulations.
Help page (2)
Display corresponding extract from operating manual.
Start/Stop a selected demo (3)
Starts or stops the current simulation.
1
3
2
5
4
6
