![background image](http://html1.mh-extra.com/html/advantech/adam-4021/adam-4021_user-manual_2856815180.webp)
ADAM-4000 Series User Manual
168
4080
7.2.2.6
$AA5N
Name
Read Counter Start/Stop Status command
Description
Requests the addressed counter/frequency module to
indicate whether counter 0 or counter 1 is active.
Syntax
$AA5N(cr)
$
is a delimiter character.
AA
(range 00-FF) represents the 2-character hexadecimal
address that you will access to.
5
is the Read Counter Start/Stop Status command.
N
determines the counter for which the status should be returned.
N = 0 represents counter 0
N = 1 represents counter 1
(cr)
is the terminating character, carriage return (0Dh).
Response !AAS(cr)
if the command is valid.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
is a delimiter character which indicates a valid command.
AA
(range 00-FF) represents the 2-character hexadecimal
address of the module.
S
represents the counter status.
S = 1 indicates the status is counting
S = 0 indicates the status is not counting
(cr)
is the terminating character, carriage return (0Dh).
Example
command: $0650(cr)
response: !061(cr)
The command requests the counter/frequency module at
address 06 to return the status of counter 0. The module
replies that the counter 0 is in the counting process.
Summary of Contents for Adam - 4021
