![background image](http://html1.mh-extra.com/html/advantech/adam-4021/adam-4021_user-manual_2856815175.webp)
163
ADAM-4000 Series User Manual
C
ha
pte
r 7
I/O
, R
ela
y &
C
ou
nte
r/F
re
qu
en
cy
4080
7.2.2.1
$AAAG
Name
Set Gate Mode command
Description
Request the specified counter/frequency module to set its
gate to one of the three states, high, low or disabled.
Syntax
$AAAG(cr)
$
is a delimiter character.
AA
(range 00-FF) represents the 2-character hexadecimal
address that you will access to.
A
is the Gate Mode command.
G
determines the gate mode:
G = 0 the gate is low
G = 1 the gate is high
G = 2 the gate is disabled
(cr)
is the terminating character, carriage return (0Dh).
Response !AA(cr)
if the command is valid.
There is no response if the module detects a syntax or
communication error, or even if the specified address does not exist.
!
is a delimiter character which indicates a valid command.
AA
(range 00-FF) represents the 2-character hexadecimal
address of the module.
(cr)
is the terminating character, carriage return (0Dh).
Example
command: $01A1(cr)
response: !01(cr)
The command requests the counter/frequency module at
address 01 to set its gate high. The module will reply with
an address indicating that it has executed the command.
Summary of Contents for Adam - 4021
