Advantech Adam - 4021, User Manual, Page: 82 / 286

ADAM-4000 Series User Manual 70
$AAXnnnn
Watchdog Timer
Setting
Set communication WDT cycle time
from 0000 ~ 9999 (unit: 0.1 second. if
value is 0000, the communication
WDT function will be disable)
5-31
$AAY
Read Watchdog
Timer Setting
Read the cycle time setting of com -
munication WDT
5-32
$AAS0 Internal Calibration
Internal self-calibration for offset and
gain errors
5-33
$AAS0
Reload default cali -
brating parameter
Reload factory default calibrating
parameter to overwrite current cali -
brating parameter
5-34
Table 4.2: ADAM-4017 Command Table
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration
Sets the address, input range, baud
rate, data format, checksum status,
and/or integration time for a specified
analog input module
5-4
$AA2 Configuration Status Return the configuration parameters
for the specified analog input module 5-10
$AAF
Read Firmware
Version
Return the firmware version code
from the specified analog input mod -
ule
5-12
$AAM Read Module Name Return the module name from the
specified analog input module
5-13
#AA Read Analog Input
Return the input values from all chan -
nels of the specified analog input
module
5-14
#AAN
Read Analog Input
from Channel N
Return the input value from channels
number N of the specified analog
input module
5-16
$AA5VV
Enable/Disable
Channels for Multi -
plexing
Enable or disable the individual chan -
nels in an analog module
5-17
$AA6 Read Channel Status Get the enable/disable status of all
channels in an analog module
5-18
$AA0 Span Calibration
Calibrates an analog input module to
correct for gain errors
5-19
$AA1 Offset Calibration
Calibrates an analog input module to
correct for offset errors
5-20
Table 4.1: ADAM-4015 Command Table