ADTRAN TOTAL ACCESS 600R, System Manual

Page: 72 / 196

Section 4 User Interface Guide Total Access 600R System Manual
72 © 2002 ADTRAN, Inc. 61200600L1-1A
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> R
X
M
ETHOD
This parameter specifies how the unit is to be authenticated by the PPP peer. There are four possible
selections. Default is
NONE
.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> R
X
U
SERNAME
(This option is not available when the
RX M
ETHOD
is set to none.)
This is the username used to authenticate the PPP peer. You can enter up to 31 characters in this field.
Default is no entry in the
RX U
SERNAME
field.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> R
X
P
ASSWORD
(This option is not available when the
RX M
ETHOD
is set to none.)
This is the password or secret that is used to authenticate the PPP peer. You can enter up to 30 characters in
this field. Default is no password.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> PPP
Configure the PPP specific parameters such as
M
AX
C
ONFIG
,
M
AX
T
IMER
,
M
AX
F
AILURE
, and
F
ORCE
P
EER
IP
A
DDRESS
from this menu.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> PPP > M
AX
C
ONFIG
This value is the number of unanswered configuration-requests that should be transmitted before resetting
PPP negotiations. The possible values are
5
,
10
,
15
, and
20
(default).
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> PPP > M
AX
T
IMER
(
SEC
)
This value is the number of seconds to wait between unanswered configuration-requests. The possible
values are
1
SEC
,
2
SECS
,
3
SECS
(
DEFAULT
) 5
SECS
, and
10
SECS
.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> PPP > M
AX
F
AILURE
Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This
value is the number of configuration-naks that should occur before an option is configuration-rejected.
The possible values are
5 (
DEFAULT
)
,
10
,
15
, and
20
.
N
ONE
The connection will not allow the PPP peer to authenticate it.
P
AP
, C
HAP
,
OR
E
AP
The unit will ask for
EAP
during the first PPP LCP negotiation and allow
the PPP peer to negotiate down to
CHAP
or
PAP
.
C
HAP OR
E
AP
The unit will ask for
EAP
during the first PPP LCP negotiation and allow
the PPP peer to negotiate down to
CHAP
but not
PAP
.
E
AP
The unit will only allow
EAP
to be negotiated. If the PPP peer is not
capable of doing
EAP
, then the connection will not succeed.