ADTRAN TOTAL ACCESS 600R, System Manual

Page: 183 / 196

Total Access 600R System Manual Section 6 ADTRAN Utilities
61200600L1-1A © 2002 ADTRAN, Inc. 183
Host Name
Accepts and stores host names. You may enter a name, an IP address, or a domain name directly from
this field. Click on the drop-down arrow to display a complete list of previously stored host names.
P
ORT
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
Edit Entry
Changes either the unit name or the IP address of each
host. Press either
Tab, Return,
or a
period (.
) after each
number in the IP address to move to the next field. If you
press
Return
or
(.)
while the cursor is located in each IP
field, that field entry is deleted.
Add New
Prompts you for the same information as the
E
DIT
E
NTRY
dialog box for new host. When enabled, the
U
SE
DNS
(Domain Name Server) feature allows users to
request
D
OMAIN
L
OOK
U
P
via a DNS server on the network rather than specifying an IP address. The
name then appears in the
H
OST
N
AME
field.
Delete
Removes a host name from the list; simply select the host name you want to remove, and, at the
prompt, click
D
ELETE
.
Connect
Establishes the Telnet session.
Disconnect
Terminates the Telnet session.
To re-establish the session, select
C
ONNECT
from
S
ESSION
M
ENU
or press
<E
NTER
>
three times. This
action restores the previous connection.
Transfer Cfg
This feature is used with ADTRAN products primarily for sending configuration files to the unit.
Exit
Ends the Telnet session and closes the Telnet screen.
Edit Menu
Provides
C
OPY
and
P
ASTE
commands.
T
ELNET
establishes a Telnet session
E
CHO
provides a loopback for troubleshooting
D
ISCARD
bit bucket; discards data
D
AYTIME
returns the time
C
HARGEN
displays as a unique character stream; used for self-tests