ADTRAN TOTAL ACCESS 600R, System Manual

Page: 90 / 196

Section 4 User Interface Guide Total Access 600R System Manual
90 © 2002 ADTRAN, Inc. 61200600L1-1A
P
RIVATE
A
DDRESS
M
ODE
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled.) The private IP
address can be specified to steer certain protocols and ports to specific servers in the private
network. Likewise, internal hosts can be steered to certain servers on the public network. A
new request from the public network matching this entry’s public parameters will be
dropped if this mode is set to
A
NY
I
NTERNAL
.
Choices are
S
PECIFIED
and
A
NY
I
NTERNAL
.
Default is
A
NY
I
NTERNAL
.
P
RIVATE
A
DDRESS
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled and
P
RIVATE
A
DDRESS
M
ODE
is set to
S
PECIFIED
.) Default is
0.0.0.0.
P
RIVATE
P
ORT
M
ODE
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled. However, it will
not be available if P
ROTOCOL
M
ODE
is set to
ICMP; A
NY
(TCP, UDP,
or
ICMP); A
LL
;
S
PECIFIED
;
or
N
ONE
.) The private destination port associated with this entry can be specified
to add more control over certain types of traffic. Leave as
A
NY
P
ORT
to cover all port types.
Choices are
A
NY
P
ORT
and
S
PECIFIED
. Default is
A
NY
P
ORT
.
P
RIVATE
P
ORT
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled and
P
RIVATE
P
ORT
M
ODE
is set to
S
PECIFIED
.
However, it will not be available if P
ROTOCOL
M
ODE
is set to
ICMP; A
NY
(TCP, UDP,
or
ICMP); A
LL
; S
PECIFIED
;
or
N
ONE
.) Default is
0
(decimal).)
T
RANSLATE BODY
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled.) When set to
Y
ES
,
the application payload in the packet is scanned for occurrences of the private/public IP
address in binary or ASCII form. Set this to
N
O
(default) for applications where this will
cause problems.
NAT V
IEW
Shows the protocols that are actively being translated.
E
NTRY
Indicates the entry number in the
NAT V
IEW
table.
P
RIV
A
DDR
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled.) This shows the
private address of the host that the entry is used for.
P
UB
A
DDR
(This option is only available when NAT P
ORT
T
RANSLATION
is enabled.) This shows the
public address this entry is using for its NAPT.