ADTRAN TOTAL ACCESS 600R, System Manual

Page: 71 / 196

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 71
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
The
A
UTHENTICATION
menu contains the required parameters for the authentication of the PPP peer and for
being authenticated by the PPP peer. Authentication is applied between the unit and the PPP peer as
described in the
A
UTHENTICATION
submenus.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> T
X
M
ETHOD
This parameter specifies how the unit is to be authenticated by the PPP peer. There are four possible
selections. Default is
NONE
.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> T
X
U
SERNAME
(This option is not available when the
TX M
ETHOD
is set to
N
ONE
.)
This is the username that is used when being authenticated by the PPP peer. You can enter up to 31
characters in this field. Default is no entry in the
TX U
SERNAME
field.
L2 P
ROTOCOL
(T1[0] - PPP) > C
ONFIG
> A
UTHENTICATION
> T
X
P
ASSWORD
(This option is not available when the
TX M
ETHOD
is set to
N
ONE
.)
This is the password or secret that is used when being authenticated by the PPP peer. You can enter up to
30 characters in this field. Default is no password.
N
ONE
The connection will not allow the PPP peer to authenticate it.
P
AP
, C
HAP
,
OR
E
AP
The unit will ask for
EAP
during the first PPP LCP negotiation and allow
the PPP peer to negotiate down to
CHAP
or
PAP
.
C
HAP OR
E
AP
The unit will ask for
EAP
during the first PPP LCP negotiation and allow
the PPP peer to negotiate down to
CHAP
but not
PAP
.
E
AP ONLY
The unit will only allow
EAP
to be negotiated. If the PPP peer is not
capable of doing
EAP
, then the connection will not succeed.
P
AP ONLY
The unit will only allow
PAP
to be negotiated. If the PPP peer is not
capable of doing
PAP
, then the connection will not succeed.