ADTRAN TOTAL ACCESS 600R, System Manual

Page: 93 / 196

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 93
R
OUTER
> C
ONFIG
> R
OUTES
> S
TATIC
R
OUTES
Use this menu to enter static routes to other networks.
R
OUTER
> C
ONFIG
> DHCP S
ERVER
Use this menu to set up the DHCP server.
R
OUTER
> C
ONFIG
> DHCP S
ERVER
> DHCP M
ODE
When set to
O
N
, the unit acts as a DHCP server and will dynamically assign IP, network mask, default
gateway, and DNS addresses to any device which transmits a broadcast DHCP request. The addresses
assigned are based on the unit’s own IP address and will be within the same network. Default is
O
FF
.
N
UM
Displays the index number in the static route table.
A
CTIVE
Adds this static route entry to the IP routing table when set to
Y
ES
and removes it (if it was previously
added) if set to
N
O
. Default is
N
O
.
IP A
DDRESS
The IP address of the host or network address of the device being routed to. Default is
0.0.0.0
.
S
UBNET
M
ASK
Determines the bits in the previous IP address that are used. If this is to be a host route, it must be set
to all ones (255.255.255.255). Default is
0.0.0.0
.
G
ATEWAY
The IP address of the router to receive the forwarded IP packet. Default is
0.0.0.0.
H
OPS
The number of router hops required to get to the network or host. Maximum distance is 16 hops.
Default is
1
.
P
RIVATE
When set to
N
O
, the unit will advertise this static route using RIP. Setting to
Y
ES
means that the route
is kept private. Default is
N
O
.