ADTRAN TOTAL ACCESS 600R, System Manual

Page: 158 / 196

158 © 2002 ADTRAN, Inc. 61200600L1-1A
Section 5 DLP-009 Total Access 600R System Manual
DLP-009
Saving Configuration using TFTP Server on Local Network
1. Connect to the unit using the 10/100B
ASE
T interface.
If you are not already connected to the unit’s
10/100B
ASE
T
port using Telnet client software, use the
procedure in DLP-006, Telnetting to the Unit , to connect to the unit.
2. Verify the TFTP server is running on the network.
3. Go to the S
YSTEM
U
TILITY
menu and select the C
ONFIGURATION
T
RANSFER
menu; press <Enter>.
4. Verify the T
RANSFER
M
ETHOD
is set to TFTP .
5. Set the TFTP S
ERVER
IP A
DDRESS
to the IP address of the machine running the TFTP Server
Program.
6. Change TFTP S
ERVER
F
ILENAME
to a unique filename. This will be the name of the configuration file
saved to the remote server. An example filename would be ta_iad.cfg .
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
7. Select the S
AVE
C
ONFIG
R
EMOTELY
menu field and press <Enter>.
Enter
Y
to confirm the request.
Perform Steps Below in the Order Listed
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S
TART
>P
ROGRAMS
>ADTRAN U
TILITIES
>TFTP S
ERVER
to start the server.
If you are using the ADTRAN TFTP server, the IP address displays in the
S
TATUS
field.
For other TFTP servers, please refer to the appropriate documentation.