ADTRAN TOTAL ACCESS 600R, System Manual

Page: 63 / 196

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 63
S
YSTEM
U
TILITY
> P
ING
> % L
OSS
Percentage loss based on ping returned from host (read-only).
S
YSTEM
U
TILITY
> T
RACEROUTE
Utility program used to trace a data path to a final destination.
S
YSTEM
U
TILITY
> T
RACEROUTE
> T
RACE
T
ARGET
Specifies the IP address of the remote system to trace the routes to.
S
YSTEM
U
TILITY
> T
RACEROUTE
> M
AXIMUM
H
OPS
Specifies the maximum number of router exchanges allowed when traveling to the final destination
(specified using the
T
RACE
T
ARGET
field). Range is
1
to
30
. Default is
30
.
S
YSTEM
U
TILITY
> T
RACEROUTE
> T
IMEOUT
(
IN SECS
)
Specifies the maximum delay (in seconds) given to a host (along a path to the final destination) to respond
to the probe datagram sent before considering the packet a failure.
S
YSTEM
U
TILITY
> T
RACEROUTE
> R
ETRIES
Specifies the number of times the probe datagram is sent to each host (along the path to the final
destination).
S
YSTEM
U
TILITY
> T
RACEROUTE
> B
EGIN
T
RACEROUTE
Activator to begin the traceroute process by sending a probe datagram with a Time To Live (TTL) value of
1.
S
YSTEM
U
TILITY
> R
ESET
U
NIT
Selecting this activator will power reset the unit.
S
YSTEM
U
TILITY
> T
ERMINAL
M
ODE
The terminal mode gives the user a command-line prompt. From this prompt, you can:
• Perform a reset with the command "reset"
• Perform a factory restore with the command "factory_reset"
• Configure the unit. The unit has the ability to download a text file which contains the configuration of
the entire unit. This configuration may then be altered in a text editor, and then uploaded to a unit. (See
DLP-013,
Saving and Loading Text Configuration Using the Terminal Command Line , for further
assistance.)
• Debug and troubleshoot. This function would be carried out with the assistance of ADTRAN Technical
Support.
• Start and stop the fail-safe timer for the auto-config feature, ( See DLP-014, Unit Installation Using The
Auto-Config Feature for details.)