manualshive.com logo in svg

Adtec RD-71, User Manual

Share
Download
Adtec RD-71 User Manual Download Page 96

 

 

 
 
Click on the Install button associated with the new file. Wait for it to completely extract and 
become available in the Installed Versions List. Once available there, simply click on the 
Select button associated with the new firmware and wait for your device to reboot. 

Demodulator Firmware Upgrade via Web User Interface 

 
In some cases, Adtec may provide a modulator or demodulator firmware upgrade.  These 
are handled separately than standard product firmware upgrades because they can take 
longer than a product firmware update and should be planned during maintenance windows. 
Adtec currently has several demodulator versions that include ADV, LB and PRM models. 
Each demodulator hardware type has a unique demod firmware version and must be 
upgraded with a compatible version. 
 
To upgrade, first determine the installed demodulator type and firmware version.  Visit the 
Upgrade -> Features tab.  The ‘BOARDS INFO’ table slot 99 will contain the installed 
demodulator version. 
 

 

 
The above example shows a PRM demod running demod version 1.17.  In this case, a 
7044AB firmware file name is required to update this demodulator.  If a demodulator 
firmware is provided for any reason, please make sure the firmware type provided matches 

 

96

 

Summary of Contents for RD-71























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands