Users with write access get administrative controls and are allowed to change any configuration
available in their ‘view’ mode. It is recommended to keep one admin user (adtec or other) that
is able to access all tabs.
Create a user:
Step
Description
1
Click the ‘Add User’ button to add a custom user.
2
Fill in the desired username
3
Fill in the desired password for the new user
4
Verify the user can login by setting the ‘Active’ configuration to ‘YES’
5
Choose read only or write Access by configuring the ‘Write Access’
configuration to ‘YES’ (write) or ‘NO’ (read only).
6
De-select tabs that are not desired to be viewed by the new user.
IE. If the ‘Security’ tab is grayed out, the newly created user will not be able
to navigate to the Security tab. Sub-tabs can also be chosen.
7
Click Apply and share credentials with the desired user/operator.
user1 without navigation capability to System, Security or sub-tabs of ‘TS Output’
User administration is possible for all users with Write Access to the Security page. The ‘adtec’
and ‘guest’ users are default users and can’t be deleted, but they may have their permissions
modified.
80
Summary of Contents for RD-71
