ADT Commercial Fire & Burglary Alarm System FOCUS 200 PLUS, Installation And Setup Manual

Page: 156 / 216

FOCUS 200 PLUS Installation and Setup Guide
14-8
< ? Enter Pri Num
_ _ _ _ _ _ _ _ _ _ _ _ _ _
< Pause Dial Tone >
< Quit Enter >
The Primary Phone Number Screen is displayed.
Enter the primary phone number for the communication of alarms,
troubles, etc. to the central monitoring center. Select Pause and
select (wait for) Dial Tone as needed. Each Pause entry is three
seconds. Up to 14 digits may be entered.
Select Enter when you are finished entering the phone number.
Any digits after the cursor will be erased.
The Enter key will then change to Delete. Select Delete to erase
the displayed phone number.
Select Quit to save the displayed phone number and return to the
Communication Screen.
Select Quit again to return to Action Menu #4.