ADPRO iFT, Hardware Installation Manual

Page: 5 / 80

ADPRO iFT Series Hardware Installation Manual
27817_08 5
Contents
1 Technical Specifications 7
2 About the iFT Series 9
2.1 Models 9
2.2 Licenses 9
2.2.1 Overview 9
2.2.2 System License 10
2.3 Software 10
2.4 Parts Information 10
3 Hard Disks 11
3.1 Required Hard Disk Capacity 11
3.2 Adding/Replacing a Hard Disk 11
3.3 Reusing Used Hard Disks 12
3.4 Retrieving Hard Disk Information 12
3.4.1 Using the ta,smart Command 12
3.4.2 Using the XO Client Software 13
3.5 Installing the First Hard Disk 13
3.6 Installing a Second Hard Disk 16
3.7 Installing a Third Disk in an iFT Device 19
3.8 Installing a Third and Fourth Disk in an iFT-E Device 22
3.9 RAID 1 Support 26
3.9.1 About RAID 1 26
3.9.2 Activating RAID 1 26
3.9.3 Retrieving RAID 1 Information 27
3.10 Remote Formatting of Hard Disks 27
4 Front LED Indicators 29
5 Motherboards 30
5.1 Overview 30
5.2 BIOS Settings 30
5.3 Connectors 30
5.4 Replacing the Motherboard 31
5.5 Replacing the Motherboard Battery 31
6 Connecting IP Cameras 32
7 Main I/O Card 34
7.1 Features 34
7.2 Connection of Inputs and Outputs 34
7.2.1 Overview of Inputs and Outputs 34
7.2.2 Input Circuits 34
7.2.3 Connecting Inputs and Outputs 35
7.2.4 Cable Strain Relief 36
7.3 Configuring the MIO Card 36
8 XO I/O Interface USB Modules 37
8.1 About the XO I/O Interface USB Modules 37
8.2 Logging on to the Hardware Configuration Tool 38
8.3 Mapping the XO I/O Interface USB Modules 40
8.4 Resetting the Hardware Mapping 42