ADPRO
iFT Series Hardware Installation Manual
27817_08
11
3
Hard Disks
3.1
Required Hard Disk Capacity
As there are many configuration possibilities, Honeywell has a hard disk space calculator available. You can find
this hard disk space calculator on the Security Solutions Support site
Search for keyword ‘calculator’.
Note
The calculator is an estimating tool only. Figures are purely indicative. The real requirements of the
hard disk capacity depend on scene content.
With firmware XO 4 and above, you can specify a minimum number of days to keep recordings on the
hard disks. The system will calculate if there is sufficient space on the hard disks in the XO device,
and it will activate system input 0050 – [SYST] – STORAGE INSUFFICIENT if this is not the case.
The system calculates the required hard disk space based on the past recordings. For details, see the
XO Client Software User Manual
(21796).
The iFT Series devices are standard delivered without, or with 1 hard disk inside. You can install:
l
In the iFT model:
o
maximum 2 hard disks in models without extra mounting holes in the rear
o
maximum 3 hard disks in models with two extra mounting holes in the rear. The labels on the suitable iFT
devices indicate ‘3 HDD Ready’.
l
In the iFT-E model:
o
Model numbers 61xxxxxx: maximum 2 hard disks.
o
Model numbers 63xxxxxx: maximum 4 hard disks.
3.2
Adding/Replacing a Hard Disk
If the system is running out of disk space, you can add a new hard disk without removing any of the hard disks in
use.
If you receive error messages from your hard disk in the
Status
screen of the XO client, you may need to replace
the faulty hard disk.
Use these reference numbers to place your order with Honeywell:
HDD capacity
Reference number
Disk only
Disk with mounting kit for ADPRO device
1 TB
19150240
39544250
2 TB
19150250
39544260
