iFT Series Hardware Installation Manual
ADPRO
40
27817_08
10. In the
Pin of the day
box, type the code that you noted down in step 7. Include the dashes.
11. Click
Enter
. The hardware configuration screen appears:
Note
If the
Pin of the day
window appears again, you have entered an invalid PIN code.
The
Usb ports
list shows the currently configured USB ports (
Device node
column):
MIO-1
is the first MIO card
(or set of MIO+EIO card).
You can now connect the XO I/O Interface USB module and map it.
8.3
Mapping the XO I/O Interface USB Modules
To connect and map the XO I/O Interface USB modules, proceed as follows:
1.
If you have not done so already, log on to the hardware configuration tool.
2.
Connect the XO I/O Interface USB module to the XO device using the provided USB cable: insert one end
into the module, and the other end into a free USB port on the XO device.
Note
If you are using a double module, Honeywell recommends to connect and map each module
separately. Because the modules all appear with the same name in the
Product
column
(
MIO CARD
), this will prevent incorrect mapping.
