ADPRO
iFT Series Hardware Installation Manual
27817_08
43
9
Network I/O Units (Net I/O)
The Network (Net) I/O units provide extra inputs and outputs for your XO device. You mount the units on a DIN
rail and connect them to the local network. To power the units: use PoE, a PoE injector, or a local power adapter
(12 VDC; min. 350 mA).
Each base unit offers 4 inputs and 4 outputs, and LED indicators and a buzzer controlled by the XO device. You
can extend each base unit with 1 to 3 extension units, to obtain up to 16 inputs and outputs.
As you can link your XO device to up to 8 units (8 base units, each with up to 3 extension units), you can obtain a
total of 128 extra inputs and 128 extra outputs.
The latest Net I/O units offer monitored inputs (requires V2 hardware and firmware, and min. firmware version
XO 4.02 running on the controlling XO device. For details on monitored inputs, see the
ADPRO Network I/O
Units Technical Manual
(33355).
Caution!
Before plugging or unplugging any extension units, switch off the power to the base unit.
Plugging or unplugging extension units with power on may result in
permanent and irreparable
damage
to the base and/or extension units.
Base unit:
Extension unit:
For detailed installation instructions, including programming the IP address and updating the software, see the
ADPRO Network I/O Units Technical Manual
(33355).
To configure the inputs and outputs, see the
XO Client Software User Manual
(21796).
