iFT Series Hardware Installation Manual
ADPRO
30
27817_08
5
Motherboards
5.1
Overview
The iFT Series operates with a PH10LU motherboard.
PH10LU motherboard
5.2
BIOS Settings
Choose
Main
>
System Time
to set the system time.
Choose
Main
>
System Date
to set the system date.
Choose
Chipset
>
PCH-IO Configuration
>
Front Panel Audio
and select
Legacy Front Panel
.
Choose
Boot
>
CSM parameters
>
Launch PXE OPROM policy
and select
Legacy only
.
Choose
Save & Exit
>
Exit and Reset
and press Enter.
Leave all other parameters to the default settings.
5.3
Connectors
Note
You must restart the XO client software after connecting devices to a USB port.
USB input 1 (/dev/ttyU1) is reserved for an external modem.
Note
The illustrations below show the default numbering for the USB ports. If you use external XO I/O
Interface USB modules, the system adjusts the internal numbering of the USB ports, and the values
in the images below are no longer valid.
Make sure to map all devices using the hardware configuration tool, and assign new USB port
numbers to existing devices on the USB ports. Also, after removing the XO I/O Interface USB
modules, you can reset the USB port numbering back to the default values as shown in the images
below. For details, see the
XO I/O Interface USB Module Technical Manual
(32688).
The image below indicates the available motherboard connectors at the rear of the device.
