ADPRO iFT Hardware Installation Manual Download Page 12

Page: 12 / 80

iFT Series Hardware Installation Manual

ADPRO

27817_08

HDD capacity

Reference number

Disk only

Disk with mounting kit for ADPRO device

4 TB

19150270

39544262

6 TB

19150280

39544263

8 TB

19150290

39544264

10 TB

19150300

39544266

Note

Not all hard disks are compatible with all firmware versions. Upgrade your device to firmware version
XOa 3.02.0033 or above for full compatibility.

3.3

Reusing Used Hard Disks

It is possible to mount a hard disk coming from another device into a new device. However, you must

format the

used hard disk

to erase all data on the disk to prevent any conflicts or data damage. In addition, if you install a

used disk in an XO device that runs firmware version XOa 3.00 or above, the system may enter the

hard disk

lockdown mode

: recording is then not possible. The following message will appear:

If you want to install a disk from another device, and you need to recover the recordings that are on the used disk,
follow the instructions in the Tech Tip

Recovering Recordings from Used HDDs

(29160).

3.4

Retrieving Hard Disk Information

You can retrieve hard disk information and identify possibly faulty hard disks using the Telnet

ta,smart

command,

or using the XO client software.

3.4.1

Using the ta,smart Command

SMART stands for Self-Monitoring Analysis and Reporting Technology. Execute the

ta,smart

command in a

Telnet session to obtain the SMART information for all hard disks in the XO device.

Summary of Contents for iFT

















































































Search results

Summary of Contents for iFT

Reviews:

Related manuals for iFT

Brands by name

Popular brands

ADPRO iFT, Hardware Installation Manual

Search results

Summary of Contents for iFT

Reviews:

Related manuals for iFT

Brands by name

Popular brands