iFT Series Hardware Installation Manual
ADPRO
16
27817_08
5.
If the SATA cables do not have a locking mechanism, use tie-wraps to secure the cables on the disk(s) in
the following way:
6.
If there are unused cables left, bundle them with tie-wraps.
7.
Place the top cover back: fix it with 2 screws at the front, 4 at the top, and 3 at the back.
8.
Connect a monitor/screen and keyboard to the device. Switch on the power supply and wait for the boot
window to appear.
9.
Select
XO Installer
and press Enter.
Note
The boot window only appears for a few seconds, then the device continues booting. To make
sure that you do not miss it, press the arrow keys on the keyboard repeatedly while the device is
booting. The device will then stop at the boot window, and this gives you time to select and open
the
XO Installer
menu.
10. Choose
Update current system
>
Manage recording disks
.
11. Select the newly installed hard disk in the list and press Enter.
12. Choose
Format and use selected disks
(using the tab key). The system formats the selected hard disk.
13. When formatting is finished, choose
Main Menu
, and then choose
Reboot
.
The device now restarts. After restarting, the installed hard disk is ready for use.
3.6
Installing a Second Hard Disk
Material required for the second hard disk:
Part
reference number
Disk screws
8 x #17434080
SATA cable
1 x #16520877
iFT(-E) HDD bracket
1 x #17011890
iFT(-E) HDD bracket, L-shaped
1
1 x #17011895
Caution!
l
Before installing hard disks, stop the device. Switch it off and unplug the power cord.
l
Take all necessary precautions to prevent static discharges that may damage the device: use an
anti-static wristband, an anti-static mat…
l
The procedure below assumes that you are using a
new disk
, or, in case of a used disk, that you
will
format the used disk
and erase all recordings on it. If you want to install a used hard disk
while keeping the recordings on it, follow the instructions in the Tech Tip
Recovering Recordings
from Used HDDs
(29160).
1
The L-shaped bracket is required if you install more than 2 disks. If you will use only 2 disks, you can use 2 ‘flat’ HDD
brackets (#17011890).
