ADPRO
iFT Series Hardware Installation Manual
27817_08
9
2
About the iFT Series
Note
You can find the latest versions of this document and any referenced document on the Security
Solutions Support site
(logon may be required). If a document number is
indicated (between parentheses), you can enter it in the Keywords box on the site, and search for the
document.
2.1
Models
The iFT Series currently consists of the following models:
l
iFT: up to 32 IP channels and up to 16 analytics channels via trade-off
l
iFT-E: up to 32 IP channels and 32 analytics channels.
On the iFT model, you trade in 1 video channel for 1 analytic channel. This means, for example, that if you need
1 analytic channel, you can use maximum 31 (= 32 – 1) video channels. If you need 2 analytic channels, you can
use 30 video channels, and so on. A fully equipped iFT can use maximum 16 analytic channels with 16 (= 32 - 16)
video channels.
For optimal performance, disable the monitor output when using more than 16 IP channels on an iFT.
Note
The most recent iFT models come with a system license that supports 32 IP channels. The system
license in older systems supports only 16 IP channels. You can upgrade your system license, free of
charge, using Xchange. For instructions, see
Field Alert #7 – Upgrading to 32 Channels
(29477).
Note
Wherever
XO device
is mentioned in this document, it applies to all the devices above, unless
specifically mentioned otherwise.
Multi-site configuration is possible:
l
Integration of up to 10 000 XO devices
l
Remote video and audio, live video, and consultation of recordings
l
Compatible with S3100, VCP, and M3000
l
SDK for third-party integration.
2.2
Licenses
2.2.1
Overview
All XO devices require licenses:
l
System license
l
IP video channel licenses
l
(Optional) PIR interface license (PIR-HLI)
l
(Optional) Analytic application licenses: IntrusionTrace and LoiterTrace.
