Adixen ASM 142, User Manual

Page: 36 / 336

A 600
Options
GB
02446
-
E
d
it
io
n
04
-
J
une
08
Roughing system
7
In order to reduce the roughing time when testing large volumes, a
second roughing pump can be added to the roughing system:
• ASM 192 T / 192 T2 total capacity: 40 m 3 /h or 24 cfm.
• ASM 192 TD+ / 192 T2D+ total capacity: 50 m 3 /h or 36 cfm.
Apart from the roughing capacity, the weight and the power
consumption, the characteristics and the use of the leak detector
remain the same.
Interface board
8
The helium leak detector can be equipped with a software version
which will offer a complete RS 232 protocol:
• 3 operating modes: basic, advanced, printer;
• possibility to remote control the detector (start/stop, autozero,
auto-cal etc...);
• possibility to obtain and adjust the settings;
• possibility to obtain all the maintenance information for preventive
maintenance purposes.
This RS 232 is the most effective interface to supervise your leak test
from a PC (data recording on an Excel sheet, for instance) and/or to
monitor the detector from a small PLC.
Remote control cable
length
9
3 lengths are proposed: 5 m (16 Ft), 10 m (32 Ft) and 15 m (49 Ft).
Test of gas line
10
Used to perform spray testing on long lines (typical diameter 1/4’’),
with a reduced response time due to the transfer of the helium by a
carrier gas injected in viscous flow.
In this case, the detector is equipped with an additionnal 1/4” VCR
connector specific to this option.
Stainless steel cover
(UCT)
11
Designed for use of the unit in clean rooms (“Ultra Clean
Technology”).
The front and rear covers and frame are made of stainless steal.
3/5