Adixen ASM 142 User Manual Download Page 134

Page: 134 / 336

C 304

Correction factor

2/2

00263

une

Procedure with user level

selection

adjustment

VACUUM COR

SNIF COR

VACUUM

COR

SNIF COR

Adjustment

C 110

General notes

(in vacuum or

sniffing test mode)

•

During the external calibration process:

basic digital display x VACUUM/SNIF COR = target value

Basic digital display is the helium signal basic display without

correction ratio (as if COR indicator is OFF or VACUUM/SNIF COR

equal to 1.00E-00).

•

Once the external calibration correction is validated, the digital

display is modified:

corrected digital display = basic digital display x VACUUM/SNIF COR

The analog display (standard scale) always displays the basic value of

the helium signal which is not modified by VACUUM/SNIF COR.

•

During the last step of the external calibration, the VACUUM/

SNIF COR is displayed and automatically calculated with respect to

the fixed target value and the present basic signal value.

The VACUUM/SNIF COR ratio is fixed and memorized when the

AUTOCAL key is pressed to confirm the CORRECTION and stop the

external calibration process.

•

The COR indicator is ON as soon as the VACUUM/SNIF COR is

ON and different from 1.00E-00.

If the target value is the same value as the standard signal on the

digital display, in other word if VACUUM/SNIF COR is equal to

1.00E+00, the COR indicator is automatically OFF: the external

calibration is OFF.

•

If RESET is pressed during or at the last step of the external

calibration process, the leak detector comes back to the previous

digital display status which was effective before the external

calibration request and VACUUM/SNIF COR is not changed.

Summary of Contents for ASM 142

















































































































































































































































































































































Search results

Summary of Contents for ASM 142

Reviews:

Related manuals for ASM 142

Brands by name

Popular brands

Adixen ASM 142, User Manual

Search results

Summary of Contents for ASM 142

Reviews:

Related manuals for ASM 142

Brands by name

Popular brands