Adixen ASM 142, User Manual

Page: 162 / 336

C 500
Inlet vent
1/2
B
00972
-
E
d
it
io
n
06
-
J
ui
n
08
A help for control panel utilization/access.
Operating principle of the control panel C 110 Access to level
4
- Password C 130
Setting and maintenance part presentation of the control panel
Access to parameters and parameters active
depending on authorization
C 120
Summary of screens
Complete displays list with access
way and associated sheet
C 140
Choices proposed to
the operator
The operator can connect the leak detector:
- to the vent air function,
- the gas line option (ASM 182 TD+ only).
At any time, during or after test, the inlet status is displayed
on the LCD and it is possible to control it (except for user level
interface
1
).
The proposed default value is “off” (= valve closed).
Inlet: Air Vent
Air vent purpose
At the end of a test cycle, 2 possibilities are available:
- venting (putting back to atmospheric pressure)
- not venting (keeping under vacuum) the part or installation tested.
This one can be made in a automatic or forced way.
That is why, the operator should program the following parameters:
- air vent at the end of a test cycle (“air off”/”air on”)
- activation of this air vent (“automatic”/”operator”).
Air inlet activation
at the end of the cycle
Air inlet at the end
of the cycle
After the test
Automatic
On
Automatic
air inlet
Off
No automatic
air inlet
Operator
On
No automatic
air inlet
Forced way air inlet
by the operator
Off