– 133 –
COMMUNICATION PROGRAMMING GUIDE
Field #
Low Speed
Contact ID
High Speed
Express
*46, *48
Choose transmission
No effect
No effect
No effect
speed and frequency
*52, *53
Send as either 4+2
No effect
No effect
No effect
or expanded
*79, *80
Enables alarm restores
Enables alarm restores
Enables alarm restores
Enables alarm restores
*49
Add checksum digit
No effect
Add checksum digit
No effect
*50
Sescoa/Radionics;
No effect
No effect
No effect
Selects fixed digit time
instead of fixed interdigit.
NOTES
Note: Low Speed will
not send 3+2
messages. Zone ID
digit is suppressed.
Loading communication defaults results in the following
Low Speed
(*94*80)
• Selects low speed, standard format, with no checksum, for both phone
numbers.
• Assigns the following report codes:
03 for zones 002-047, 056-128
01 for zones 001 & 048-055 (fire zones)
02 for zones 062, 063 (panic trans), & 995, 996, 999 (keypad panics)
09 for all alarm restores
• Enables all zone type restores.
For "expanded" reporting, enable fields *52 and *53.
ADEMCO Express
(*94*81)
• Selects Ademco express reporting format, with checksum, for both phone
numbers.
• Report codes for zones 1-99, RF receiver, and keypad panics are sent as their
respective zone ID numbers (01-86, 88-91, 95-99), Duress is sent as "DD".
Alarm restore is "E" + 2nd digit.
• Enables all zone type restores.
ADEMCO High Speed
(*94*82)
• Selects Ademco High Speed format, with no checksum, for both phone
numbers.
• Zone reporting is assigned to channels as described later in this section.
• Enables all zone type restores.
• Enables Duress to be sent.
ADEMCO's Contact ID
(*94*83)
• Selects Contact ID format for both phone numbers.
• Reporting is enabled for all zones.
• Enables all zone type restores.
• Refer to the SYSTEM COMMUNICATION section for event code
definitions.
