– 129 –
The following describes each format in greater detail.
3+1 and 4+1 Standard Formats
Comprised of a 3- (or 4-) digit subscriber number and a single
digit report code (e.g. Alarm, Trouble, Restore, Open, Close, etc).
3+1 and 4+1 Expanded Formats
Comprised of a 3- (or 4-) digit subscriber number, and a two-digit
report code. The first digit is displayed on the first line, followed
by a second line where the first digit is repeated 3 (or 4) times
and followed by the second digit. This is the “expanded” digit.
4+2 Format
Comprised of a 4-digit subscriber number and 2-digit report
code.
Ademco Contact ID
Comprised of a 4-digit subscriber number, 1-digit event qualifier
Reporting Format
("new" or "restore"), 3-digit event code, 2-digit Partition No., and
3-digit zone number, user number, or system status number.
Ademco Expanded High Speed
Comprised of 13 digits as follows: A 4-digit account
eight channels of zone information (1-8 or duress plus 9-15) +
one status channel, which identifies the type of events being
reported in the eight zone locations.
Report
3+1/4+1
3+1/4+1
4+2
Standard Expanded
Low
Spd
or
Express
Alarm
SSS(S) A
SSS(S) A
SSSS AZ
AAA(A) Z
Trouble
SSS(S) T
SSS(S) T
SSSS Tt
TTT(T) t
Bypass
SSS(S) B
SSS(S) B
SSSS Bb
BBB(B) b
ACMains Loss
SSS(S) E
SSS(S) E
SSSS EAC
EEE(E) AC
Low Batt
SSS(S) L
SSS(S) L
SSSS LLB
LLL(L) LB
Open
SSS(S) O
SSS(S) O
SSSS OU
OOO(O) U
Close
SSS(S) C
SSS(S) C
SSSS CU
CCC(C) U
Test
SSS(S) G
SSS(S) G
SSSS Gg
GGG(G)g
Restore
SSS(S) R
SSS(S) R
SSSS RZ
Alarm
RRR(R) Z
AC Mains Restore
SSS(S) RA
SSS(S) RA
SSSSRA Ac
RARARA(RA)Ac
LoBat Res.
SSS(S) RL
SSS(S) RL SSSS
RLLB
RLRLRL(RL)LB
Trouble Res.
SSS(S) RT
SSS(S) RT SSSS
RTt
RTRTRT (RT)t
Bypass Res.
SSS(S) RB
SSS(S) RB
SSSS RBb
RBRBRB (RB)b
Where:
SSS or
SSSS =
Subscriber ID
C =
Close Code-1st Digit
A =
Alarm Code-1st digit
U =
User Number (1st & 2nd digits)
Z =
Typically Zone Number*-2nd digit
G g =
Test Code (1st & 2nd digits)
T t =
Trouble Code (1st & 2nd digits)
R =
Restore Code (Alarm)1st & 2nd digits
B b =
Bypass Code (1st & 2nd digits)
R Tt = Restore Code (Trbl)1st & 2nd digits
E A C = AC Mains Loss Code (1st & 2nd digits)
R Bb = Restore Code (Byps)1st & 2nd digits
L L B = Low Battery Code(1st & 2nd digits)
R AAC = Restore Code (AC Mains)1st & 2nd digits
O =
Open Code-1st Digit
R LLB = Restore Code (Bat)1st & 2nd digits
*Zone numbers for:
[
✴
] + [#], or [B] = 99;
[3] + [#], or [C] = 96;
[1] + [
✴
], or [A] = 95;
Duress = 92
