6247G/6247C DC Voltage Current Source/Monitor Operation Manual
2.1.1 Front Panel
2-4
2.1.1.5
OUTPUT CONTROL Section
Figure 2-6 OUTPUT CONTROL Section
1.
4W/2W
key:
Selects the output sensing 4-wire or 2-wire connection.
2.
OPR
key:
Switches between Operate and Suspend.
* : Suspend status outputs the suspended voltage without turning
OFF the output relays. The OPR indicator blinks.
3.
SUSPEND (SHIFT, OPR)
key: Sets Suspend regardless of Operate or Standby status.
4.
STBY
key:
Sets the output status to Standby.
2.1.1.6
TRIGGER Section
Figure 2-7 TRIGGER Section
1.
HOLD
key:
Selects the trigger mode (AUTO or HOLD).
2.
TRIG
key:
When the trigger mode is set to HOLD, triggers measurement and
pulse source in the DC source or pulse source mode, and starts
sweep source or moves to the next step in the sweep source mode.
When the trigger mode is set to AUTO, triggers sweep source.
3.
SWP STOP (SHIFT, TRIG)
key:
Stops the sweep.
1
2, 3
4
1
2, 3
