USER MANUAL
BEAT HF
Edition: January 2016
-
INTRODUCTION
Revision: No. 4
8
1.5
MEASURES OF PROTECTION AGAINST ACCIDENTS
1.5.1
Safety alert symbols:
This
User Manual
employs the following safety alert symbols:
Indicates information, considered important, but not hazard-
related.
When appears this hazard alert sign in this manual, carefully read
what is says.
Indicates a hazardous situation that, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation that, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury.
1.5.2
Safety measures and dangers:
Please go by the following security measures:
M
Keep the fusion control box out of the reach of non authorised personnel, non qualified
personnel and children.
M
Protect the control unit from water, rain, snow, etc.
M
Protect the electrofusion cables and the cable that goes to the power supply of cutting
objects.
M
All damaged cables must be replaced immediately being supplied by the authorised
After-sales Service of STPAcuster..
M
Always plug the control box to a power supply provided with differential and ground
connection.
M
Do not expose the fusion control box to heavy weights. All slight damage caused to
the external frame or to other elements will have to be replaced immediately by the
authorised After-sales Service of STPAcuster.
M
The fusion control boxes which are not being used must be kept out of the reach of
the non authorised personnel. They will have to be kept in rooms of low humidity
degrees and of restricted access.
M
Always use adequate working clothes.
For outside work, it is recommended to use rubber gloves and boots with insulating
soles. In wet areas, this advice is essential.
M
Before using the fusion control box, its external condition will have to be checked, as
well as its working condition. All components must be correctly assembled in order to
guarantee the correct functioning of the unit.
M
The damaged components must be repaired or replaced by the authorised After-sales
Service of STPAcuster.
M
The fusion control box can only be opened by the authorised After-sales Service of
STPAcuster.
M
Should the fusion control box not work properly, it will have to be sent immediately
to the authorised After-sales Service of STPAcuster.
