USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
INTRODUCTION
-
5
CHAPTER 1: INTRODUCTION
1.1
GENERAL
The electrofusion units of the range
BEAT HF
are designed to carry out polyethylene (PE)
and polypropylene (PP) pipe/fittings joints through electrofusion fittings with a range of
8 V to 48 V electrofusion voltage.
This
User Manual
applies to all commercialized models:
BEAT HF-MV
Electrofusion unit which the electrofusion parameters are entered
manually. No traceability.
BEAT HF-2
Electrofusion unit that the electrofusion parameters can be entered
manually or by bar-code system. No traceability.
BEAT HF (Tr)
Electrofusion unit with manual and automatic (via scanner) enter
of the electrofusion parameters and with traceability.
The
BEAT HF-MV
electrofusion unit receives the relevant data of the fitting via operator’s
manual introduction: VOLTAGE and TIME from the fitting manufacturer. Take into account
that some fitting manufacturers provide different fusion times according to ambient
temperature. Refer to the fitting manufacturer’s instructions.
The
BEAT HF-2,
in addition of the data manual input is also able to enter the
electrofusion parameters by means of a bar-code automatic recognition system.
The
BEAT HF
(
Tr
version), receives the relevant data of the fitting via the bar code
system and also by operator’s manual input and is provided with full traceability, so it
allows the data entry such as operator’s ID, job order ID, additional data and fitting
traceability. The unit stores all this data in its memory for further treatment.
The technical data contained in this
Manual
are purely informative and may be changed
at anytime. ACUSTER GLOBAL, S.L. declines all responsibility for claims arising from
misuse of the data contained herewith and/or errors or omissions detected after
publication.
This
Manual
must be considered as part of the unit.
