USER MANUAL
BEAT HF
Edition: January 2016
- MODE OF USE
Revision: No. 4
20
Press the and arrows to move the cursor to another field and the and arrows to
select the values. Press <START> to confirm and go on to the next screen.
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Confirm
Press either the or
arrow once to select the
Erase screen.
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Erase
Press <START> to confirm and go on to the next screen or select Erase if the operator’s
identity needs to be altered. Go back to Read barcode.
Ú
Select the Edit barcode option by pressing either the or arrow when the operator’s
identity needs to be introduced manually according to the ISO 12176-3 structure. When
<START> is pressed a cursor will appear in the first position on the left of the field to be
edited.
dd/mm/yy
hh:mm
Operator
$
---------------
----------------
Edit barcode
Manually introduce the 30 digits corresponding to the
identity by using the arrow buttons.
Press the and arrows to move the cursor to another field and the and arrows to
select the values.
Press <START> to accept and to go on to the next screen.
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Confirm
The operator’s number, country and certifying organi-
sation are shown.
Press <START> to accept and go on the next screen.
If the code introduced manually were incorrect.
dd/mm/yy
hh:mm
Operator
----------------
----------------
Wrong data
If a code is entered incorrectly, the unit will emit two
acoustic signals and the message Wrong data will be
shown on the screen. Press <STOP> to go to the Read
barcode screen. Select Edit barcode and repeat the
entry procedure.
Once the identity has been entered correctly, press <START> to confirm and to go on to
the next screen.
Û
If the entry of the operator’s identity is set up as optional, this identification can be
omitted by selecting the Skip over option.
Press <START> to go to the next screen.
