USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
MODE OF USE -
21
3.3.3 Entering the job number: only if enabled
If the entry of the job is enabled, the unit allows different setups of entry:
C
Optional set up of job:
- It can be omitted by selecting the Skip over and pressing the <START> button.
- It can be entered using a barcode or manually.
C
Obligatory job set up:
- It must be entered without choice.
- It can be entered by using a barcode or manually.
C
Set up of time of entering:
- If it is set up as OFF, the job number will be saved throughout the day until zero
hours of the next day. The job number can be modified or erased at any stage.
- If it is set up as ON, the job number will be lost each time the unit is turned off.
It will need to be reintroduced.
After entry of the operator ID, or not, or if not enabled, when the unit is turned on the
following screen will appear:
If a job number has been previously introduced:
Initial screen:
Next screen:
dd/mm/yy
hh:mm
Job
ABCDEFGHIJKLMNOP
Confirm
Press either the or
arrow once to select the
Erase screen.
dd/mm/yy
hh:mm
Job
ABCDEFGHIJKLMNOP
Erase
Press <START> to confirm and go to the next screen or select Erase if the job number
needs to be altered.
If a job number has not been introduced or erased previously:
Initial screen
Ø
:
Next screen
Ù
:
Final screen
Ú
:
dd/mm/yy
hh:mm
Job
----------------
Read barcode
dd/mm/yy
hh:mm
Job
----------------
Manual edition
dd/mm/yy
hh:mm
Job
----------------
Skip over
