USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
MODE OF USE -
19
Press <START> to confirm and go to the next screen or select Erase if there is a need to
alter an operator’s identity.
If an operator’s identity has not previously been introduced or erased:
Initial screen
Ø
:
Next screen
Ù
:
dd/mm/yy
hh:mm
Operator
----------------
Read barcode
Press either the or
arrow once to select the
Manual edition screen.
dd/mm/yy
hh:mm
Operator
----------------
Manual edition
Next screen
Ú
:
Final screen
Û
:
dd/mm/yy
hh:mm
Operator
----------------
Edit barcode
Press either the or
arrow once to select the
Edit barcode and Skip
over screens.
dd/mm/yy
hh:mm
Operator
----------------
Skip over
Ø
On the initial Read barcode screen, the unit remains on hold while the operator’s bar-
code is read via optic pen or scanner.
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Confirm
When the identity is introduced, the operator’s decoded
number, country and certifying organisation are
shown.
If the barcode or reading were erroneous.
dd/mm/yy
hh:mm
Operator
----------------
Wrong data
If a barcode is entered incorrectly, the unit emits two
acoustic signals and shows a Wrong data message on
the screen. Either press <STOP> or <START> to go to
the Read barcode screen and repeat the entry
procedure.
Once the identity has been processed successfully, press <START> to confirm and to go
to the next screen.
Ù
If the operator’s identity is not introduced by means of a barcode, go to the next option
Manual edition. When <START> is pressed, a cursor will appear in the first position on
the left of the field to be completed.
dd/mm/yy
hh:mm
Operator
$
----------------
Manual edition
Manually introduce by using the arrow buttons. Maxi-
mum 16 alpha-numeric characters. Characters ac-
cepted: capital letters, 0 to 9 and the symbols . , + *
< > / space - ( ).
