USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
MODE OF USE -
51
When selecting ON in Show, the additional data screen is enabled when the unit is turned
on (sequentially after the identification of the operator and job, if it is enabled). It allows
any alpha-numerical ID up to 16 characters to be entered.
Traceability:
Accepting this option allows you to gain access to the following traceability setup option:
Show
OFF Use the or keys to shift from OFF to ON or vice
versa.
Press the <START> key to validate the changes.
Press the <STOP> key to exit this option without mak-
ing any changes.
When selecting ON in Show, the traceability screen is enabled when the unit is turned
on (sequentially after the identification of the operator, job and additional data, if it is
enabled). It allows the entry of the fitting’s traceability ID by means of a barcode or
manually following the ISO 12176-4.
Electrofusion:
Accepting this last option allows us to gain access to the electrofusion setup option:
Manual fusion
ON Use the or keys to shift from ON to OFF or vice
versa.
Press the <START> key to validate the changes.
Press the <STOP> key to exit this option without mak-
ing any changes.
With the Manual fusion on ON, the unit allows electrofusions with manually entered
data. When selecting OFF the unit will only accept the entry of data by means of a bar
code (Read barcode) or by introducing the fitting’s 24 alpha-numerical characters of its
corresponding barcode (Edit barcode).
C
LOCKING:
When validating the Locking option the following options are given:
By date
By fusions
Others
–
•
This option is an internal option and requires an ac-
cess password to enable the locks. Consult your dis-
tributor.
