USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
UNIT’S DESCRIPTION -
11
CHAPTER 2: UNIT’S DESCRIPTION
2.1
GENERAL
The electrofusion units BEAT HF are externally made up of a metal casing with a rear
cover which constitutes the power unit, in which is mounted outside a heatsink and an
optional fan.
The model 2008 (Figures 3a, 3b and 3c), the metal casing is assembled on a stainless
steel tubular frame which allows to adjust to the desired angle, a master switch, USB/A
and USB-B connectors (BEAT HF-Tr only) and serial connector for the different
applications, the mains and electrofusion cables (all of three replaceable without opening
the casing). The front part is formed by a membrane which incorporates tactile push-
buttons to enter the data and a back-lit graphic LCD display.
Inside, the unit is formed by a power board, a processor board (CPU), in addition to all
of the electronics necessary for the electrofusion process, current and voltage controls.
Figure 3a: general view
Figure 3b: side-bag detail
Figure 3c: connectors detail
(USB for BEAT HF-Tr only)
The model 2015 (Figure 3d) the metal casing is more compact and has a carrying
handle, which is in turn serving as cables reel. On the front the main switch, a serial port
and a USB/A port are mounted.
Figure 3d: general view model 2015
(USB port for BEAT HF-Tr only)
